Rigging line redirect

The anchor point I was using in the oak yesterday was slightly stepped out from the main stem meaning  that the rigging line wouldn't of entered the lowering bollard at the correct angle. So to rectify this I installed a second Pulley block at the top of the stem, at the crown break.

This ensured that the line ran plum with the stem and entered the Lowering bollard at a right angle to the stem. 

The large ISC pulley block might be a bit overkill for using as a redirect but it was the only pulley I had with us that would fit both the 16mm line you see hear and the 19mm we switched too when we moved onto rigging some bigger lumps.